Drone Lighting

Give yourself the ability to add additional light when piloting your drone with these Rugo Drone Mounts for YUNEEC H520/Typhoon H from FoxFury. Each mount can hold a single Rugo 700-300 light (not included) and can be attached almost anywhere on the YUNEEC H520/Typhoon H's landing struts. Each mount's light platform has the ability to swivel, so even when affixed to your drone's landing gear, you have additional flexibility in where you point the light.

Firehouse Technology ARC High Intensity Drone Strobe Lights have by independent agencies to comply and exceed FAA requirements for flight at night. We recommend mounting one light on top of the aircraft and one on the bottom for 360 degree coverage. This greatly improve visibility for pilot from ground up and aviation looking down.  Strobe lights have 3 modes, fixed, flash and spot. 600 Lumen output per light, greater than 3 SM. Fully independent no wiring needed all you need to provide strobes and spot lighting that can assist in maintaining orientation, spotting down or lost drones as well as meets the FAA 107 rule for strobes during night or twilight flights. These can be easily mounted on all Drones and RC Fixed Wing Planes and should be mounted one on top and one on bottom for 360 degree coverage. They are independent of the aircraft electrical system and are powered by there own internal lipo batteries so they do not steal from flight time, not do the reduce flight time due to weight or drag.

The FoxFury Handlebar and Drone Mount fits on bicycle or motorcycle handlebars and roll bars measuring from 15 mm to 50 mm in diameter. Zip-tie style strap design requires no tools to install.

The Wingsland Z15 is a bright, 3-axis stabilized gimbal spotlight with high power beads. Powered by DJI SkyPort, it has an operating range of up to 150 m and can be easily integrated onto DJI Matrice 200 Series V1 and V2 drones, lighting the space at night or in lowlight conditions for users in firefighting, emergency response, law enforcement and beyond. Modes Switch between Always on, Flashing, and SOS modes for different environments and applications. Air Cooling System The built-in air-cooling system prevents the spotlight from overheating by constantly dissipating heat. Intelligent Protection The Wingsland Z15 is protected against overheating. The system will automatically adjust when the internal temperature exceeds 90℃. Supports Dual Downward Gimbals The Wingsland Z15 can be used with DJI Zenmuse payloads on DJI aircraft that include a dual-downward gimbal, helping to illuminate operations. Applications Public Safety: Thanks to its high luminance and long operating range, the Wingsland Z15 provides public safety officials crucial visibility in lowlight conditions across many different types of missions, helping teams gain an aerial overview over a large area. Some applications include: Firefighting: light up a path to guide the public to a safe place after a fire or a natural disaster. Emergency Response/Search and Rescue: locate missing persons in hard-to-reach areas when visibility is low. Law Enforcement: act as a flexible light source for crowd management, forensic investigations, or routine patrols. Compatible Products: DJI Matrice 200 Series, Matrice 200 Series V2

Adjustable Drone Leg Mounts that are compatible with DJI 3, 4, Pro and Autel X-Star Style Drones. Each kit comes with 2 adjustable brackets to mount on left and right landing gear / legs. • Brackets are made with strong, light weight aircraft grade aluminum. • Brackets are secured to drone with sturdy custom rubber lock rings. Drone Liability Disclaimer Users are responsible for safe operation of drone; following all local regulations and laws for drone operation; and proper mounting of lights to drone. Litra is not liable for any damage to drone, property or persons during the operation of the drone. Litra is not liable for operator error in operation of drone or improper mounting of mounts and lights to drone. USER MUST ENSURE MOUNTS AND LIGHTS DO NOT INTERFERE WITH DRONE ROTOR TRAVEL PATH.

Mount your LitraTorch™ to a drone, bicycle handlebar, seatpost or any other tube shaped structure. The all aluminum mount is fixed to the bar with 2 machine screws (Hex wrench included) . The light is fixed to the mount with a standard GoPro style finger mount. The angle and direction are fully adjustable. Fits tubes from 3/4" to 1.5" / 28mm to 31.8mm (smaller using supplied shims). • Fits tubes from 3/4" to 1.5" / 28mm to 31.8mm (smaller using supplied shims) Drone Liability Disclaimer Users are responsible for safe operation of drone; following all local regulations and laws for drone operation; and proper mounting of lights to drone. Litra is not liable for any damage to drone, property or persons during the operation of the drone. Litra is not liable for operator error in operation of drone or improper mounting of mounts and lights to drone. USER MUST ENSURE MOUNTS AND LIGHTS DO NOT INTERFERE WITH DRONE ROTOR TRAVEL PATH.

Extend your drone flying time with the Rugo™ QuickSwap­® Power Pack with Strobe. This power pack installs in seconds and allows the Rugo™ to be used on the high setting for a longer period of time. Units can be recharged via a USB charger (not included). This Power Pack meets all standards per FAA 107.29 and FAR 91.205 as required anti-collision strobes for dusk/dawn and night flights Rechargeable, Quick Swap™ Power Pack The Rugo™ operates with a rechargeable Quick Swap® Power Pack with Strobe. It provides 1 - 6.75 hours of light on a single charge and fully recharges via a USB adaptor in 2.5 hours. Power Packs can be swapped out in seconds with no tools. Additional Power Packs are also available to extend shoot time out in the field. Durability All FoxFury lights have a rugged built-to-last design. This all-weather design can thrive in desert heat, heavy rain, cold of a snow storm, and everything in between. This rugged light is tough enough for any job and withstands impact.

The FoxFury D10 is a drone, helmet and utility light that is proudly Made in the USA. It mounts to most drones and helmets with the Flat Mounting Pad via Dual Loc Velcro or 5915 VHB Tape. MOLLE and OPSCORE mounts expand the mounting capabilities. The D10's 30° LED operates on continuous or strobe light modes. This rechargeable and splash proof light is durable and compact for a variety of uses where light is needed in a tight space. The D10 (white light) provides anti-collision lighting and navigational lighting and meets global night flight requirements. FoxFury D10-IR light has above details plus additional infrared capabilities.

Easily identify, locate and assist critical missions using the innovative EXOLANDER© Spotlight System for the EVO II.

The FoxFury D10 Parrot ANAFI USA Lighting System is a custom saddle and 3 D10 lights that is proudly made in the USA. It is designed specifically for the Parrot Anafi USA drone.

The FoxFury Rugo R1S DJI Matrice M300 / M600 Light System is designed for use with the DJI Matrice M300 / M600 drones. Each system comes with two Rugo R1S lights and a set of drone mounts. Each light has a Quick Swap Power Pack with Strobe that meets FAA regulations for UAV night flight and anti-collision lighting. The R1S puts out up to 700 lumens and has an operational beam distance of up to 100 ft., making it the perfect choice for search & rescue, inspection, mapping, and assessment missions.  Using two Rugo lights along with the included set of mounts is recommended in order to maintain the drone’s center of gravity. Key Features: Rechargeable Quick Swap Power Pack with Strobe The strobe mode meets FAA regulations for UAV night flights and anti-collision lighting. The Power Pack provides 1 - 6 hours of light on a single charge and fully recharges via a USB adaptor in 2.5 hours. Power Packs can be swapped out in seconds with no tools. Additional Power Packs are available as separate accessories to extend usage time. Tri-Lens Technology Three interchangeable lens settings, allowing the user to adapt to different uses. Spot = 25° Best for distance (maximum operational distance of 100 ft.) Area = 55° Best for mid-range (maximum operational distance of 30 ft.) Flood = 120° Best for close-up (maximum operational distance of 10 ft.) Durability All FoxFury Rugo lights have a rugged built-to-last design. They are impact resistant and fully submersible up to 10 ft. They also meets NFPA fire resistant requirements and can be decontaminated after use.

The FoxFury Rugo RCS DJI Matrice M300 / M600 Light System is designed for use with the DJI Matrice M300 / M600 drones. Each system comes with two (2) Rugo lights and a set of drone mounts. Both lights include the Quick Swap Power Pack with Strobe that meets FAA regulations for UAV night flight and anti-collision lighting. The RCS is best for photography, videography, and other applications where high CRI light is needed. The RCS has a CRI rating of 92 and a color temperature of 5700K, so it portrays colors more accurately than normal LED light. It puts out up to 620 lumens and has an operational beam distance of up to 50 ft.  Using two Rugo lights along with the included set of mounts is recommended in order to maintain the drone’s center of gravity.  Key Features: Rechargeable Quick Swap Power Pack with Strobe The strobe mode meets FAA regulations for UAV night flights and anti-collision lighting. The Power Pack provides 1 - 6 hours of light on a single charge and fully recharges via a USB adaptor in 2.5 hours. Power Packs can be swapped out in seconds with no tools. Additional Power Packs are available as separate accessories to extend usage time. Tri-Lens Technology Three interchangeable lens settings, allowing the user to adapt to different uses. Spot = 25° Best for distance (maximum operational distance of 50 ft.) Area = 55° Best for mid-range (maximum operational distance of 30 ft.) Flood = 120° Best for close-up (maximum operational distance of 10 ft.) High CRI The Rugo RCS has a CRI rating of 92, which displays color more accurately and naturally than other LED lights. This makes the RCS a very useful tool for anyone that needs to see true-to-life colors, including photographers, videographers, inspectors, medical professionals, and more. Durability All FoxFury Rugo lights have a rugged built-to-last design. They are impact resistant and fully submersible up to 10 ft. They also meets NFPA fire resistant requirements and can be decontaminated after use.

Mount two FoxFury Rugo lights onto a DJI Matrice M300 or M600 drone using this FoxFury Rugo Drone Mount 25mm. The mount is designed to attach a rugged FoxFury Rugo R1S, RC, or RC LED light onto the legs of the drone to provide aerial lighting. The pack includes two mounts. Key Features Drone-Mounting Kit for Rugo LED Lights Mount Light onto DJI Matrice M300 / M600 2 x 25mm Snap Mounts Included Compatible with Rugo R1S/RCS/RC

The FoxFury Rugo is a rugged go-anywhere lighting tool designed for a variety of uses including photo and video, drone visibility, search, and inspection. These lights feature a sliding Tri-Lens, which allows the users to select between area, spot, and flood lighting. The Rugo can mount to drones, cameras, light stands, and more. Each light comes with a ¼”-20 thread mount, cold shoe mount, and standard mount.  The Rugo R1S is ideal for drone visibility, search and rescue, inspection, and general utility functions. This light has a standard light head that ranges from 70 – 700 lumens and has an operational beam distance of up to 100 ft. The R1S also comes with a Quick Swap Power Pack with Strobe that has four modes: low, medium, high, and strobe. The strobe function meets FAA regulations for UAV night flight and anti-collision lighting. It allows the Rugo R1S to be seen from up to 3 statute miles away and strobes at a rate of 90 cycles per minute.  Key Features Rugged LED light for utility functions such as SAR, drone flight, inspection use 70-700 lumens reaches up to 100 ft. 5700K daylight color temperature, CRI 70 Strobe rate 90 cycles per minute 3 x beam angles: 25, 55, and 120° Four modes: low, medium, high, and strobe. Rated at underwater depths up to 60 ft. Switch between spot, mid, and flood beam spreads by sliding the Tri-Lens: Spot = 25° Best for distance (maximum operational distance of 50 ft) Area = 55° Best for mid-range (maximum operational distance of 30 ft) Flood = 120° Best for close-up (maximum operational distance of 10 ft) The included mounting choices can be easily changed without tools The power pack provides between 1 and 6 hours of light on a single charge  Fully recharges via a USB adapter in 2.5 hours Power packs can be swapped out in seconds with no tools Durable and rugged built-to-last design of aluminum and nylon Impact resistant, meets NFPA fire resistant requirements, can be decontaminated after use Fully submersible to 10 ft. 

The FoxFury Rugo is a rugged go-anywhere lighting tool designed for a variety of uses including photo and video, drone visibility, search, and inspection. These lights feature a sliding Tri-Lens, which allows the users to select between area, spot, and flood lighting. The Rugo can mount to drones, cameras, light stands, and more. Each light comes with a ¼”-20 thread mount, cold shoe mount, and standard mount.  The Rugo RC is ideal for photography and videography. This light has a High CRI light head that ranges from 70 – 620 lumens and has an operational beam distance of up to 50 ft. The RC has a CRI rating of 92 and a color temperature of 5700K, which portrays colors more accurately than normal LEDs. Making the RC a useful tools for anyone that needs to see true-to-life colors including photographers, videographers, inspectors, and medical professionals. The RC also comes with a Quick Swap Power Pack that has four modes: dim, low, medium, and high. Key Features Rugged LED light ideal for photography and videography Features 5600K (daylight) output at a maximum of 620 lumens. CRI rating of 92 displays color more accurately and naturally Four modes: dim, low, medium, and high. Light enough to be flown on a drone, mounted on top of a camera Rapidly go between spot, mid, and flood beam spreads by sliding the Tri-Lens Spot = 25° Best for distance (maximum operational distance of 50 ft.) Area = 55° Best for mid-range (maximum operational distance of 30 ft.) Flood = 120° Best for close-up (maximum operational distance of 10 ft.) The included mounting choices: a 1/4"-20 threaded hole, cold shoe mounting foot, 2-prong mount, and a 3-prong mount Easily change mounts without tools using the mounting thumbscrews The power pack provides between 1 and 6 hours of light on a single charge Fully recharges via a USB adapter in 2.5 hours Power packs can be swapped out in seconds with no tools Fully submersible to 10 ft.  Impact resistant, meets NFPA fire resistant requirements, can be decontaminated after use