FoxFury

Give yourself the ability to add additional light when piloting your drone with these Rugo Drone Mounts for YUNEEC H520/Typhoon H from FoxFury. Each mount can hold a single Rugo 700-300 light (not included) and can be attached almost anywhere on the YUNEEC H520/Typhoon H's landing struts. Each mount's light platform has the ability to swivel, so even when affixed to your drone's landing gear, you have additional flexibility in where you point the light.

The FoxFury Handlebar and Drone Mount fits on bicycle or motorcycle handlebars and roll bars measuring from 15 mm to 50 mm in diameter. Zip-tie style strap design requires no tools to install.

Extend your drone flying time with the Rugo™ QuickSwap­® Power Pack with Strobe. This power pack installs in seconds and allows the Rugo™ to be used on the high setting for a longer period of time. Units can be recharged via a USB charger (not included). This Power Pack meets all standards per FAA 107.29 and FAR 91.205 as required anti-collision strobes for dusk/dawn and night flights Rechargeable, Quick Swap™ Power Pack The Rugo™ operates with a rechargeable Quick Swap® Power Pack with Strobe. It provides 1 - 6.75 hours of light on a single charge and fully recharges via a USB adaptor in 2.5 hours. Power Packs can be swapped out in seconds with no tools. Additional Power Packs are also available to extend shoot time out in the field. Durability All FoxFury lights have a rugged built-to-last design. This all-weather design can thrive in desert heat, heavy rain, cold of a snow storm, and everything in between. This rugged light is tough enough for any job and withstands impact.

The FoxFury D10 is a drone, helmet and utility light that is proudly Made in the USA. It mounts to most drones and helmets with the Flat Mounting Pad via Dual Loc Velcro or 5915 VHB Tape. MOLLE and OPSCORE mounts expand the mounting capabilities. The D10's 30° LED operates on continuous or strobe light modes. This rechargeable and splash proof light is durable and compact for a variety of uses where light is needed in a tight space. The D10 (white light) provides anti-collision lighting and navigational lighting and meets global night flight requirements. FoxFury D10-IR light has above details plus additional infrared capabilities.

Easily identify, locate and assist critical missions using the innovative EXOLANDER© Spotlight System for the EVO II.

The FoxFury D10 Parrot ANAFI USA Lighting System is a custom saddle and 3 D10 lights that is proudly made in the USA. It is designed specifically for the Parrot Anafi USA drone.

The FoxFury Rugo R1S DJI Matrice M300 / M600 Light System is designed for use with the DJI Matrice M300 / M600 drones. Each system comes with two Rugo R1S lights and a set of drone mounts. Each light has a Quick Swap Power Pack with Strobe that meets FAA regulations for UAV night flight and anti-collision lighting. The R1S puts out up to 700 lumens and has an operational beam distance of up to 100 ft., making it the perfect choice for search & rescue, inspection, mapping, and assessment missions.  Using two Rugo lights along with the included set of mounts is recommended in order to maintain the drone’s center of gravity. Key Features: Rechargeable Quick Swap Power Pack with Strobe The strobe mode meets FAA regulations for UAV night flights and anti-collision lighting. The Power Pack provides 1 - 6 hours of light on a single charge and fully recharges via a USB adaptor in 2.5 hours. Power Packs can be swapped out in seconds with no tools. Additional Power Packs are available as separate accessories to extend usage time. Tri-Lens Technology Three interchangeable lens settings, allowing the user to adapt to different uses. Spot = 25° Best for distance (maximum operational distance of 100 ft.) Area = 55° Best for mid-range (maximum operational distance of 30 ft.) Flood = 120° Best for close-up (maximum operational distance of 10 ft.) Durability All FoxFury Rugo lights have a rugged built-to-last design. They are impact resistant and fully submersible up to 10 ft. They also meets NFPA fire resistant requirements and can be decontaminated after use.

The FoxFury Rugo RCS DJI Matrice M300 / M600 Light System is designed for use with the DJI Matrice M300 / M600 drones. Each system comes with two (2) Rugo lights and a set of drone mounts. Both lights include the Quick Swap Power Pack with Strobe that meets FAA regulations for UAV night flight and anti-collision lighting. The RCS is best for photography, videography, and other applications where high CRI light is needed. The RCS has a CRI rating of 92 and a color temperature of 5700K, so it portrays colors more accurately than normal LED light. It puts out up to 620 lumens and has an operational beam distance of up to 50 ft.  Using two Rugo lights along with the included set of mounts is recommended in order to maintain the drone’s center of gravity.  Key Features: Rechargeable Quick Swap Power Pack with Strobe The strobe mode meets FAA regulations for UAV night flights and anti-collision lighting. The Power Pack provides 1 - 6 hours of light on a single charge and fully recharges via a USB adaptor in 2.5 hours. Power Packs can be swapped out in seconds with no tools. Additional Power Packs are available as separate accessories to extend usage time. Tri-Lens Technology Three interchangeable lens settings, allowing the user to adapt to different uses. Spot = 25° Best for distance (maximum operational distance of 50 ft.) Area = 55° Best for mid-range (maximum operational distance of 30 ft.) Flood = 120° Best for close-up (maximum operational distance of 10 ft.) High CRI The Rugo RCS has a CRI rating of 92, which displays color more accurately and naturally than other LED lights. This makes the RCS a very useful tool for anyone that needs to see true-to-life colors, including photographers, videographers, inspectors, medical professionals, and more. Durability All FoxFury Rugo lights have a rugged built-to-last design. They are impact resistant and fully submersible up to 10 ft. They also meets NFPA fire resistant requirements and can be decontaminated after use.

Mount two FoxFury Rugo lights onto a DJI Matrice M300 or M600 drone using this FoxFury Rugo Drone Mount 25mm. The mount is designed to attach a rugged FoxFury Rugo R1S, RC, or RC LED light onto the legs of the drone to provide aerial lighting. The pack includes two mounts. Key Features Drone-Mounting Kit for Rugo LED Lights Mount Light onto DJI Matrice M300 / M600 2 x 25mm Snap Mounts Included Compatible with Rugo R1S/RCS/RC

The FoxFury Rugo is a rugged go-anywhere lighting tool designed for a variety of uses including photo and video, drone visibility, search, and inspection. These lights feature a sliding Tri-Lens, which allows the users to select between area, spot, and flood lighting. The Rugo can mount to drones, cameras, light stands, and more. Each light comes with a ¼”-20 thread mount, cold shoe mount, and standard mount.  The Rugo R1S is ideal for drone visibility, search and rescue, inspection, and general utility functions. This light has a standard light head that ranges from 70 – 700 lumens and has an operational beam distance of up to 100 ft. The R1S also comes with a Quick Swap Power Pack with Strobe that has four modes: low, medium, high, and strobe. The strobe function meets FAA regulations for UAV night flight and anti-collision lighting. It allows the Rugo R1S to be seen from up to 3 statute miles away and strobes at a rate of 90 cycles per minute.  Key Features Rugged LED light for utility functions such as SAR, drone flight, inspection use 70-700 lumens reaches up to 100 ft. 5700K daylight color temperature, CRI 70 Strobe rate 90 cycles per minute 3 x beam angles: 25, 55, and 120° Four modes: low, medium, high, and strobe. Rated at underwater depths up to 60 ft. Switch between spot, mid, and flood beam spreads by sliding the Tri-Lens: Spot = 25° Best for distance (maximum operational distance of 50 ft) Area = 55° Best for mid-range (maximum operational distance of 30 ft) Flood = 120° Best for close-up (maximum operational distance of 10 ft) The included mounting choices can be easily changed without tools The power pack provides between 1 and 6 hours of light on a single charge  Fully recharges via a USB adapter in 2.5 hours Power packs can be swapped out in seconds with no tools Durable and rugged built-to-last design of aluminum and nylon Impact resistant, meets NFPA fire resistant requirements, can be decontaminated after use Fully submersible to 10 ft. 

The FoxFury Rugo is a rugged go-anywhere lighting tool designed for a variety of uses including photo and video, drone visibility, search, and inspection. These lights feature a sliding Tri-Lens, which allows the users to select between area, spot, and flood lighting. The Rugo can mount to drones, cameras, light stands, and more. Each light comes with a ¼”-20 thread mount, cold shoe mount, and standard mount.  The Rugo RC is ideal for photography and videography. This light has a High CRI light head that ranges from 70 – 620 lumens and has an operational beam distance of up to 50 ft. The RC has a CRI rating of 92 and a color temperature of 5700K, which portrays colors more accurately than normal LEDs. Making the RC a useful tools for anyone that needs to see true-to-life colors including photographers, videographers, inspectors, and medical professionals. The RC also comes with a Quick Swap Power Pack that has four modes: dim, low, medium, and high. Key Features Rugged LED light ideal for photography and videography Features 5600K (daylight) output at a maximum of 620 lumens. CRI rating of 92 displays color more accurately and naturally Four modes: dim, low, medium, and high. Light enough to be flown on a drone, mounted on top of a camera Rapidly go between spot, mid, and flood beam spreads by sliding the Tri-Lens Spot = 25° Best for distance (maximum operational distance of 50 ft.) Area = 55° Best for mid-range (maximum operational distance of 30 ft.) Flood = 120° Best for close-up (maximum operational distance of 10 ft.) The included mounting choices: a 1/4"-20 threaded hole, cold shoe mounting foot, 2-prong mount, and a 3-prong mount Easily change mounts without tools using the mounting thumbscrews The power pack provides between 1 and 6 hours of light on a single charge Fully recharges via a USB adapter in 2.5 hours Power packs can be swapped out in seconds with no tools Fully submersible to 10 ft.  Impact resistant, meets NFPA fire resistant requirements, can be decontaminated after use

The FoxFury Rugo is a rugged go-anywhere lighting tool designed for a variety of uses including photo and video, drone visibility, search, and inspection. The Rugo has a rechargeable Quick Swap Power Pack that lasts up to 6 hours and recharges in 2.5 hours via USB adaptor. These lights also feature a sliding Tri-Lens, which allows the users to select between area, spot, and flood lighting. The Rugo can mount to drones, cameras, light stands, and more. Each light comes with a ¼”-20 mount, cold shoe mount, and standard mount. Drone mounts and drone light bundles are available separately. Key Features: Rechargeable Quick Swap Power PackAll Rugo lights have a rechargeable Quick Swap Power Pack that provides 1 - 6 hours of light on a single charge and fully recharges via a USB adaptor in 2.5 hours. The strobe mode meets FAA regulations for UAV night flights and anti-collision lighting. The Power Packs can be swapped out in seconds with no tools. Additional Power Packs are available as separate accessories to extend usage time. Tri-Lens TechnologyRugo Lights have three interchangeable lens settings, allowing the user to adapt to different uses. DurabilityAll Rugo lights have a rugged built-to-last design. They are impact resistant, meet NFPA fire resistant requirements, and can be decontaminated after use. 

The FoxFury D3060 is a small format drone and utility. It has strobe-capable 30 and 60 degree dual LEDs that operate independently to provide 360-degree lighting. The waterproof D3060 is rechargeable via USB-C and offers best-in-class durability. It lasts 1.5 to 3 hours on a single charge, and only weighs 1.3 oz (37g). Its various mounting options enable it to be used as a utility, anti-collision or navigation light. Dual LEDsThe D3060 has two independent lights. They can be turned on independently or simultaneously. Both lights have low, high, and strobe modes. The strobe mode meets FAA and global regulations for UAV night flight and anti-collision drone lighting.360 SwivelThe base plate of the D3060 swivels 360-degrees, allowing the user to rotate the light in any direction necessary.Mounting OptionsThe D3060 comes with (2) 3M Dual Lock Fasteners, so users can mount it to almost any drone. Strap inserts and button holes are built into the base plate, so users can wear the light on helmets, clothing, bags, vests, etc. ABOUT FOXFURY LIGHTING SOLUTIONS: FoxFury is a family-owned and operated company based in Oceanside, CA. Our goal is to provide the best quality professional flashlights, headlamps and helmet lights, forensic lasers, tactical lights, portable scene lights, right angle lights and drone and camera lights. FoxFury lights are used by first responders including firefighters, paramedics, police (law enforcement) and military, industrial professionals, photographers and videographers, around the world. All FoxFury lighting tools are cordless, battery powered and utilize the brightest, latest LED technology. Rechargeable and intrinsic options are available. All lights are waterproof, all-weather and impact resistant. We aim to manufacture the most dependable, durable professional lights on the market. FoxFury lights come with a Lifetime Limited Warranty. All lights are designed and engineered in California.